128,00 €
50+
Features
IEX-2 module, DALI light controller DALI output, 4 DSI outputs 3 analog/digital inputs 2 digital inputs light, motion and IR sensor input
Multisensor
Features
IEX-2 module, DALI light controller DALI output, 4 DSI outputs 3 analog/digital inputs 2 digital inputs light, motion and IR sensor input
Technical specifications
| Input type | dry contact, internal pull-up 12V 2mA |
| analog input 0..10V (10 bit, 0..1023) | |
| potentiometer 0..10k (10 bit, 0..1023) | |
| Sensor input | RHKF-U (light), IR-580-IQ (motion), |
| LRI8134 (multisensor) |
| DALI output current | 100mA |
| Load protection | short circuit protected |
| Number of ballasts | 32 |
| DSI output current | 250mA per channel |
| Load protection | short circuit protected |
| Number of ballasts | 100 |
| Light sensor | |
| Power supply output | 12V 25mA |
| Input range | 0..10V (10 bit, 0..1023) |
| Internal pull-up | none |
| Motion detector | |
| Power supply output | 12V 25mA |
| Signal type | dry contact |
| Internal pull-up | 12V 1mA |
| Infrared receiver | |
| Power supply output | 5V 10mA |
| Signal type | TTL level, active low |
| Internal pull-up | 5V 0.5mA |
| Power supply | 24V (18..28V), 150mA |
| Galvanic isolation | none (DALI ballasts must be SELV) |
| Operating conditions | 0..45°C, 0..95% rh non-condensing |
| Dimensions | 108x86x46mm |
| Weight | 200g |
| Degree of protection | IP42 |
| Standards | EN 60730-1 |
Order Code
| LC-D |