100,00 €
50+
Features
wireless DALI-to-DALI bridge replacement for DALI wiring wired/wireless combinations multiple ballasts per bridge internal DALI power supply very long range, no hopping protected private connection multiple addressable groups
Mounting
Device should not be installed inside the metal cabinet.
Distance from antenna to the nearest object should be at least 10cm.
Features
wireless DALI-to-DALI bridge replacement for DALI wiring wired/wireless combinations multiple ballasts per bridge internal DALI power supply very long range, no hopping protected private connection multiple addressable groups
Technical specifications
| DALI | |
| DALI power supply | internal, 18V 20mA |
| Ballasts per adapter | 5 (2mA) or 10 (1mA) |
| Bus length | 50m max. |
| Galvanic isolation | 4kV DALI to mains (SELV) |
| 230V tolerance | no |
| Radio | |
| Frequency band | 868MHz (EU), 915MHz (US) |
| Modulation | FSK, 80kHz bandwidth |
| Group address | 32-bit, automatically generated |
| Connection time | 10s power-on to network ready |
| Output power | 25mW |
| Minimum distance | 3m between devices |
| Operating range | 300m with optical visibility |
| General | |
| Power supply | 230V, 50..60Hz, 2W |
| Terminals | 0.25..1.5mm2 |
| Operating conditions | -20..+40°C, 0..85% rh nc |
| Storage temperature | -40..+85°C |
| Dimensions | 93x45x27mm, 86mm antenna |
| Weight | 80g |
| Degree of protection | IP20 |
| Standards | EN60730-1, EN300-220-2 |
Order Code
| WD-1 |
