Features

programmable controller 12 opto-coupler inputs 24V 10 relay outputs 8A 4 universal input/outputs Ethernet, USB, IEX-2, 2x RS-232 RFM wireless interface (optional) EnOcean gateway (optional) 24V DC power supply

Dashboard presents new Cybro-3 features, and provide a quick test for both software and hardware components of the controller. It is a part of CyPro package, located in /CyPro-3/Examples/CybroDashboard/.

Features

programmable controller 12 opto-coupler inputs 24V 10 relay outputs 8A 4 universal input/outputs Ethernet, USB, IEX-2, 2x RS-232 RFM wireless interface (optional) EnOcean gateway (optional) 24V DC power supply

Technical specifications
Digital input (ix00..ix11): 24V 7mA, opto isolated, bidirectional
Digital output (qx00..qx09): relay 8A/250VAC or 8A/30VDC resistive
CPU board:
System clock 100MHz, 10ns per instruction
Watch dog 100ms software, 250ms hardware
Program memory 896Kb for user program
Data memory 64Kb for user variables
Data retention typ. 7 days at 25°C
RTC accuracy typ. ±2 sec per day at 25°C
COM1/COM2: RS232,  no galvanic isolation
USB: USB 2.0, no galvanic isolation
Ethernet: 10/100M
Galvanic isolation 1500V transformer
IEX-2:
Bus load 48 modules (Cybro + 47 IEX-2)
Baud rate 20, 50, 100 (default), 250, 500kbp
Galvanic isolation none none
Cable length 100m (100kbps, non-terminated)
300m (100kbps, terminated)
500m (50kbps, terminated)
General:
Operating conditions 0..50°C, 0..85% rh non-condensing
Level of ambient pollution 2
Power supply 24V (18..28V)
Power consumption 50mA (no load)
180mA (10 relays, 4x 10Vout)
IEX-2 power output 24V 2A, limited by resettable fuse
Mounting DIN rail (35mm)
Dimensions 106x117x58mm
Weight 280g
Degree of protection IP20
Installation category III
Standards EN 61010-1, EN 61010-2-201, EN 61131-2
Order Code
Cybro-3-24 12 opto-coupler inputs,
10 relay outputs 8A,
4 universal inputs/outputs,
24V DC power supply
Options
– RFM free-programmable radio
– ENO EnOcean gateway
– ISO galvanically isolated RS485
Notes:
– controller cannot have ENO and RFM options at the same time
– when ENO option is used, RS485 serial interface uses COM1 instead of COM3 port
– ISO option doesn’t make sense on controller without RS485 interface